Ford Powerstroke 2022 Instructions
Step 1
Download the installer file by navigating to this page here, and clicking on the "Download ecmsync™ Pro" button.
Step 2
Once the installer has downloaded on your computer, double-click the "ECMSync_Installer". The Installer will prompt you to click on a button titled "Next". Click on the "Next" button until we get to the Customer Information section.
You may need to move the windows around to see the new popup.
Step 3
These are prerequisite installations.
Enter a username and company name within the customer information fields. You can enter any value for these fields. Once the inputs are filled out, click on the "Next" buttons until we see a "Would you like to install this device software" popup.
Step 4
Click "Install" on the popup asking to install the software onto your device. After the program has finished installing, click on the "Finish" button.
Step 5
On the "FireDaemon OpenSSL 3 Setup popup, "Click "Next".
Again, you may need to move the windows around to see the new popup.
Step 6
Within the "Configuring additional options" modal, click the "Adjust PATH system environment" checkbox.
Again, you may need to move the windows around to see the new popup.
Step 7
Continue clicking "Next" till we see the "Install" button. On the "Ready to Install" modal, click on the "Install" button. Once the install is complete, click on the "Finish" button to exit the setup wizard.
Step 8
On the next popup select "I agree to the License terms and conditions", and then click on the green "INSTALL" button.
Step 9
Check the "I agree to the license terms and conditions" to true, and click on the "Install" button.
Step 10
Congratulations! Click "Finish" to complete the process of installing the ecmsync™ Pro software.
Step 1
If you don't already have ecmsync™ Pro installed on your device, this link here covers the exact steps to install ecmsync™ Pro on your device.
Step 2
Once ecmsync™ is installed on your device, double-click "ecmsync™ Pro" to open the app. Read the End User License Agreement by hovering your mouse over the text and scrolling. Once you get to the bottom of the EULA, the "I Agree" button will activate. Click on the "I Agree" button.
Step 3
Using the dropdown menus, select your vehicles make, year, engine displacement and body type. After selecting the correct values for your vehicle, click "CONFIRM".
Step 4
Select the "Confirm" button to confirm your vehicle selection.
Step 5
Click "Connect" within the "Connect ecmsync™ device" modal as shown in the screenshot.
NOTICE: Make sure at this stage the ecmsync™ device is plugged into your laptop and into the OBD port of the vehicle.
Step 6
Click "Connect" within the "Connect vehicle" modal as shown in the screenshot.
Step 7
Congratulations, you've successfully connected to your vehicle! Once we connect to the vehicle, we should see the "Module", "VIN", and "S/N" values get populated.
Step 1
First, connect ecmsync™ Pro to the vehicle by following the steps found inside the "Connect Your Vehicle" dropdown button.
Step 2
After clicking the "Connect" button within the "Connect Vehicle" modal, we should see a popup titled "Do you already have an encrypted tune file, or do you need to create one".
Step 3
Click "Browse" and select the .ecmt file with the same file path and file name as the encrypted file provided.
Step 4
Click on the Download icon (near the top right corner of the "Connect ecmsync™ device" modal) to save the config file to a specific file path of your choice.
Step 5
Copy your vehicle information by clicking on the "copy" button found near the top right corner of the "Connect vehicle" modal.
Step 6
Please send the vehicle information on your clipboard along with the saved config file to the dealer that you purchased ecmsync™ from.
Step 7
Once you recive your encrypted file, save it on your computer, and continue on the next step.
Step 8
Click on the "Browse" button, select the .ecmt file (either saved or sent to from a mechanic/dealer), and open the file.
Step 9
Click the "Load File to Device" button. During the setting up process, please do not press any buttons or disconnect the cables.
Step 10
When the setting up stage is complete, click on "Ready to Sync". This will start the process of tuning your vehicle!
Step 11
Your tune has successfully loaded onto your vehicle! You can now disconnect the device and laptop from the vehicle.
Step 12
Please wait 5 minutes, or until the light on the ecmsync™ device turns from blue to green. Once we wait the 5 minutes or for the light to turn green, reconnect the device with the ecmsync™ Pro program to verify that the new tune is successfully written to the vehicle.
Step 1
If you don't already have ecmsync™ Pro installed on your device, this link here covers the exact steps to install ECMSync Pro on your device.
Step 2
Open the ecmsync™ program. Select "Device" and click "Save Configuration" within the dropdown menu to save the configuration file to your computer. You will need this .ecma configuration file for step 7.
Step 3
Navigate to ecmsync.com, and click on the Accounts icon to log into your ecmsync™ account. If you aren't already, log into your account on the next page.
Step 4
After logging into your account, click on the "Click here" button below the "Looking to buy more credits" text.
Only approved mechanics/dealers can view this page. Please click here to apply and become a dealer or mechanic today!
Step 5
Select the number of credits to purchase, and go through the online checkout process to purchase ecmsync™ credits. The credit upload process will take place once you've purchased the credits.
Step 6
Once you've purchased ecmsync™ credits, navigate back to your Customer Account page by clicking here. On the Customer Account page, we should now see the "Add credits" and "Used orders & credits" section. Click on the "Add credits" dropdown and select an order to load the credits from.
Step 7
Once you select an order from the "Select your eligible order" dropdown, click on the "Choose a file" button that should appear after selecting an order. Click on this button, and select your .ecma configuration file. For the .ecma configuration file generation step, please follow the first step in in this guide here.
Step 8
A popup should appear after clicking the "Submit files" button. Review the information on the confirmation modal, and click "Add Credits". Wait for the email to send to your address. This process can take up to 30 seconds.
Step 9
Once the email successfully sends, you will see a "Email sent successfully" modal as shown in the screenshot below.
NOTE: If you see the email failed to send, please refresh the browser, and start the process again. If the issue persists, please reach out to our support team.
Step 10
After seeing the "Email sent successfully" modal (above), check your inbox for an email containing the new .ecmc file! It will look something like this screenshot.
Step 11
After completing the first 10 steps, we should end up with a credit file sent to you via email. Please download this .ecmc file to your computer.
Step 12
Open up the ecmsync™ program, and click on the credit icon near the top-right corner. The credit icon looks like two small yellow circles.
Step 13
Click the "Browse" button on the modal to open up the file explorer. Within the file explorer, locate the .ecmc file that was sent to you via email, and click "Open".
Step 14
After selecting your .ecmc file, click on "Load" to load the credits onto your device.
Step 15
Congratulations! You've successfully added credits to your ecmsync™ device. Click "OK" on the success modal, and click on the "X" near the top right corner of the load credits modal to close the modal.